プルプル・プルリン Collective!

Posted: **Wed Sep 09, 2026 6:12 am**

Working reference for provisioning TM ATA units (D-Link / Allwintech) together with the RG.
Covers device access, RG VLAN setup, SIP registration and the physical connection order.

Order of work

Configure the ONU
Configure the RG — set port 4 to VLAN 400, service type Internet
For business lines, set port 4 to VLAN 400 and service type Internet
Reset and configure the ATA
Set the user ID / account to [email protected]

1. ATA device access

ATA 4 Port — D-Link DVG-5004S

Code: Select all

IP address : http://192.168.100.1
Username   : tmadmin
Password   : Ata4Port$

ATA 8 Port — Allwin H380S / D-Link

Code: Select all

IP address : http://192.168.100.1
Username   : tmadmin
Password   : Ata8Port$

ATA 16 Port — Allwintech

Code: Select all

IP address : http://192.168.22.1
Username   : tmadmin
Password   : tmadmin1

2. RG configuration

RG4 (Silver)

Code: Select all

IP address : 192.168.0.1
Username   : operator
Password   : Opr@**** ( last 4 digits of the router MAC address )

Then:

Setup → Add
Channel: Bridge
Connection type: Voice
Enable VLAN, VLAN ID 400
Port mapping: select LAN 3 only
Apply Change

RG — TP-Link (black)
Set the laptop to a static address first:

Code: Select all

IP      : 192.168.0.100
Subnet  : 255.255.255.0
Gateway : 192.168.0.1

Browse to 192.168.0.1, then Advanced → Network → VLAN:

LAN 4: VOIP
VLAN ID: 400

RG — Unifi
Same laptop addressing as above, then browse to 192.168.0.1:

Code: Select all

Username : operator
Password : h566UniF

Setup → WAN → edit VLAN 500 → Port binding: untick LAN3 → Apply
Setup → WAN → Add:
- Enable WAN: tick
- Connection type: Bridge
- Service type: Internet
- Port binding: LAN 3
- Enable VLAN tagging: tick, VLAN ID 400, priority 0
- Apply

3. SIP registration on the ATA

Enable SIP on Server 1, then set the account. The account is the phone number with the IMS domain appended:

Code: Select all

User ID / account : [email protected]
Password          : per-line, from the provisioning record

Tick Register on the FXS port, enter the account in the same format, then the line password.

SIP proxy settings

Code: Select all

Proxy server IP / domain    : 10.225.0.1
Proxy server port           : 5060
Proxy server realm          : ims.tm.com.my
TTL (registration interval) : 3600
SIP domain                  : ims.tm.com.my
Use domain to register      : tick
Bind proxy interval for NAT : 0

Additional options

Initial unregister: tick
Support Message Waiting Indication (MWI): tick
MWI subscribe interval: 7200
Accept

Save and restart

Save setting: tick
Restart: tick
Accept → Reboot

4. Physical connections

Code: Select all

ONU LAN1  ->  RG WAN port
RG LAN4   ->  ATA WAN port

Quick summary

Configure the ONU
Configure the RG — port 4, VLAN 400, service type Internet
Business lines: port 4 → VLAN 400, service type Internet
Reset and configure the ATA
User ID / account: [email protected]

Per-line SIP credentials and subscriber numbers are not reproduced here — take those from the provisioning record for the line you are working on.

プルプル・プルリン Collective!

[GUIDE] TM ATA & RG Configuration (D-Link / Allwintech)

[GUIDE] TM ATA & RG Configuration (D-Link / Allwintech)